In Line Coupler Adapter

There are several scenarios that you may face in your everyday life where you are dealing with electrical equipment and a particular cable is not long enough to suit your requirements. This is a common issue faced by many in their homes. A solution to this problem is provided by using a simple, inexpensive device known as an in line coupler adapter, or a coupler.

Description of an In Line Coupler Adapter

An in line cable coupler is a device that accomplishes the fusing together of two similar cables without having to resort to tougher methods such as crimping or soldering. This adapter is usually small in size, made of metal or plastic, and in the shape of a box, with a couple of female inputs. So if you have a problem with the length of a cable, all you need to go is get two of them. Connect the ends to the coupler adapter and in no time at all, you will find yourself with a single, long cable connection with no interruptions.

Uses of an In Line Coupler Adapter

More often, in line coupler adapters are used with home electronic equipment. They are also made use of with automobiles and sports timers. Let's take a look at some of the applications of this device:

Coaxial In Line Coupler Adapter: This is one type of coupler adapter that is used often. A coaxial cable is a thick, electrical cable used in to transmit radio frequencies. In simpler terms, it is used for connections in home cable television, which could sometimes require longer cables. A coaxial coupler adapter will then allow male coaxial ends that are metal pronged to be plugged into both its sides that are female. Some coupler adapters require the male end to be screwed in to the female ends. The latter is more preferred as it provides a secure connection.

In Line Coupler Adapters for Automobiles: With almost a dozen cable connections in a car's motor, the motor shaft is the place where a coupler adapter is most commonly used. In such an adapter, one end is bulky and flat, while the other end would be a screw-like, tapered threaded top made of solid steel. The center of this adapter is hollow, through which the two cables are inserted, and locked in place with the help of a screw. In this way, the motor shaft and its drive cable are connected.

Ethernet Cable In Line Coupler Adapter: A coupler adapter for ethernet cables consists of two square shaped female inputs on either end of a small box. The functioning is the same as any other coupler adapter. Two cables are connected to either end, enabling the transmission of the signal directly through the adapter. This adapter is most commonly used with home computers.

Apart from these, there are many other uses for an in line coupler adapter and the design of the device would vary depending on the purpose of its use. Coupler adapters can be purchased from many retail websites on the internet and also from local hardware or electrical stores.